Chip resetter for Epson (7 and 9 pins)
  • Model: GT-CR-BAT-T0711
  • Shipping Weight: 0.0100Kilo
Excl. VAT: £5.00 Incl. VAT: £6.00
This resetter will reset genuine Epson cartridges with the following part numbers. It will also reset our compatible equivalents but please make sure that you fully read the important notes before you purchase. T007, T008, T009, T017, T018, T026, T027, T028, T029, T036, T037, T040, T041, T066, T067, T0321, T0331, T0332, T0333, T0334, T0335, T0336, T0341, T0342, T0343, T0344, T0345, T0346, T0347, T0348, T0422, T0423, T0424, T0441, T0442, T0443, T0444, T0481, T0482, T0483, T0484, T0485, T0486, T0540, T0541, T0542, T0543, T0544, T0547, T0548, T0549, T0551, T0552, T0553, T0554, T0611, T0612, T0613, T0614, T0711, T0712, T0713, T0714, T0801, T0802, T0803, T0804, T0805, T0806, T0807 This resetter will generally reset supported older 7 pin Epson cartridges without issue but please make sure that you read the following points if you intend to reset the newer genuine Epson 9 pin cartridges. When resetting chips on genuine Epson T0711, T0712, T0713, T0714, T0801, T0802, T0803, T0804, T0805 & T0806 cartridges you will need to reset your cartridges before the ink level goes below around 40% and you will also need to refrain from tipping the cartridges on their side once removed. This is because, on the new genuine Epson cartridges, there is a sensor behind the chip that is always immersed in the ink. If the cartridge is empty, low or if it is tipped on its side then air will have reached the internal sensor which it will render the cartridge permanently unrecognisable after resetting. By resetting the cartridge at above 40% ink and keeping it level you will keep the sensor immersed in ink and therefore stop the cartridge from being rejected.
Write Review

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.